Rancang bangun sistem monitoring ruang server berbasis Internet of Things (IoT) menggunakan thingspeak dan notifikasi telegram
Abstract
Server room has a very important role for an agency or company because server space is useful for storing data on server devices. In this research, a tool was designed that can monitor the temperature and humidity of the server room. Apart from that, it also adds smoke and fire detection. The sensors used are the DHT 22 sensor, MQ-2 sensor, and fire sensor. Data will be displayed on the LCD and also Thingspeak. Reading and sending sensor data using Arduino Nano and NodeMCU ESP8266. Finally, notifications were designed if conditions were above the normal threshold via the Telegram application and also a buzzer. The DHT22 sensor shows a different value from the sensor in the server room with a difference of 1°C to 2°C. . The MQ-2 sensor reading shows a value of 0 when there is no fire or smoke. When fire or smoke is approached, the sensor value immediately rises quickly beyond 1000. The fire sensor is tested by bringing the flame closer to the sensor. When the sensor is brought close to a fire, the LED on the sensor will light up and the sensor reading shows the number 1. The tool has been successfully tested and is being used properly. The sensors used display good results and the data is successfully displayed on the LCD and Thingspeak. Likewise, notifications on the Telegram application and buzzer work well.
Downloads
References
Abrianto, H. H., Sari, K., & Irmayani, I. (2021). Sistem Monitoring dan Pengendalian Data Suhu Ruang Navigasi Jarak Jauh Menggunakan WEMOS D1 Mini. Jurnal Nasional Komputasi Dan Teknologi Informasi, 4(1), 38–49.
Darussalam, D., & Azwardi, A. (2019). Penggunaan IR Flame Sensor Sebagai Sistem Pendeteki Api Berbasis Mikrokontroler pada Simulator Fire Suppression System. Seminar Nasional Teknik Mesin, 9(1), 603–611.
Hadi, S., & Adil, A. (2019). Rancang Bangun Pendeteksi Gas Berbasis Sensor MQ-2. SENSITIf: Seminar Nasional Sistem Informasi Dan Teknologi Informasi, 327–334.
Halim, D., & Sakti, D. V. S. Y. (2021). Sistem Peringatan Dini Dengan Multi Sensor Berbasis Arduino Untuk Monitoring Ruang Server. SKANIKA: Sistem Komputer dan Teknik Informatika, 4(1), 1–6.
Leksono, J. W., K.W, H., Indahwati, E., Yanuansa, N., & Ummah, I. (2019). HUMAIDILAH-Buku Modul Arduino Uno. Universitas Hasyim Asy’ari.
Mulyanto, A. D. (2020). Pemanfaatan Bot Telegram untuk Media Informasi Penelitian. MATICS: Jurnal Ilmu Komputer dan Teknologi Informasi (Journal of Computer Science and Information Technology), 12(1), 49–54.
Muthmainnah, M., Syaifudin, A., & Chamidah, N. (2023). Prototipe Alat Monitoring Suhu dan Kelembaban pada Rumah Penyimpan Tembakau Berbasis Internet of Thing (IoT). Jurnal Pendidikan MIPA, 13(1), 177–182.
Raharja, W. K. (2021). Purwarupa Alat Pendeteksi Kebakaran Jarak Jauh Menggunakan Platform Thinger. Io. Electro Luceat, 7(2), 188–206.
Sorongan, E., Hidayati, Q., & Priyono, K. (2018). ThingSpeak sebagai Sistem Monitoring Tangki SPBU Berbasis Internet of Things. JTERA-Jurnal Teknologi Rekayasa, 3(2), 219–224.
Utama, S. N., Wahid, A., & Karami, A. F. (2022). Rancang bangun helm pendeteksi denyut nadi dan pembaca doa perjalanan. Jurnal Teknoinfo, 16(2), 443–451.
Copyright (c) 2024 Akiful Khoir
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
